Prosthetic limbs with near-human levels of touch sensitivity could be developed after a technological breakthrough by Scots scientists.
A team from the University of Glasgow have developed artificial skin which mimics the nervous system and can learn from feeling ‘pain’.
Experts say it could lead to the creation of a new generation of smart robots.
Humans learn early in our lives to respond appropriately to pain in order to prevent us from hurting ourselves again.
The team were able to make a robot hand recoil from a sharp jab in the centre of its palm.
Engineers developed artificial skin with a new type of processing system based on ‘synaptic transistors, which mimics the brain’s neural pathways in order to learn.
In a new paper published today in the journal Science Robotics, researchers described how they built their prototype computational electronic-skin (e-skin), and how it improves on the current state of the art in touch-sensitive robotics.
Scientists have been working for decades to build artificial skin with touch sensitivity, including spreading an array of contact or pressure sensors across the electronic skin’s surface to allow it detect when it comes into contact with an object.
READ MORE: World first Scots dementia study offers prevention hopes
Data from the sensors is then sent to a computer to be processed and interpreted.
The sensors typically produce a large volume of data which can take time to be properly processed and responded to, introducing delays which could reduce the skin’s potential effectiveness in real-world tasks.
The new form of electronic skin, developed in Glasgow, draws inspiration from how the human peripheral nervous system interprets signals from skin in order to eliminate latency.
As soon as human skin receives an input, the peripheral nervous system begins processing it at the point of contact, reducing it to only the vital information before it is sent to the brain.
The reduction of sensory data allows efficient use of communication channels needed to send the data to the brain, which then responds almost immediately for the body to react appropriately.
READ MORE: Dig team in search for Glasgow Garden Festival remains
To build an electronic skin, researchers printed a grid of 168 synaptic transistors made from zinc-oxide nanowires directly onto the surface of a flexible plastic surface and connected the synaptic transistor with the skin sensor present over the palm of a fully-articulated, human-shaped robot hand.
When the sensor is touched, it registers a change in its electrical resistance - a small change corresponds to a light touch, and harder touch creates a larger change in resistance.
This input is designed to mimic the way sensory neurons work in the human body.
In earlier generations of electronic skin, that input data would be sent to a computer to be processed.
Instead, a circuit built into the skin acts as an artificial synapse, reducing the input down into a simple spike of voltage whose frequency varies according to the level of pressure applied to the skin, speeding up the process of reaction.
READ MORE: University research cuts should be 'cause for concern'
The team used the varying output of that voltage spike to teach the skin appropriate responses to simulated pain, which would trigger the robot hand to react.
By setting a threshold of input voltage to cause a reaction, the team could make the robot hand recoil from a sharp jab in the centre of its palm.
In other words, it learned to move away from a source of simulated discomfort through a process of onboard information processing that mimics how the human nervous system works.
The development of the electronic skin is the latest breakthrough in flexible, stretchable printed surfaces from the University of Glasgow’s Bendable Electronics and Sensing Technologies (BEST) Group, led by Professor Ravinder Dahiya.
Professor Dahiya, of the University’s James Watt School of Engineering, said: “We all learn early on in our lives to respond appropriately to unexpected stimuli like pain in order to prevent us from hurting ourselves again.
"Of course, the development of this new form of electronic skin didn’t really involve inflicting pain as we know it – it’s simply a shorthand way to explain the process of learning from external stimulus.
“What we’ve been able to create through this process is an electronic skin capable of distributed learning at the hardware level, which doesn’t need to send messages back and forth to a central processor before taking action.
"Instead, it greatly accelerates the process of responding to touch by cutting down the amount of computation required.
“We believe that this is a real step forward in our work towards creating large-scale neuromorphic printed electronic skin capable of responding appropriately to stimuli.”
Fengyuan Liu, a member of the BEST group and a co-author of the paper, added: “In the future, this research could be the basis for a more advanced electronic skin which enables robots capable of exploring and interacting with the world in new ways, or building prosthetic limbs which are capable of near-human levels of touch sensitivity.”
The team’s paper, titled ‘Printed Synaptic Transistors based Electronic Skin for Robots to Feel and Learn’, is published in Science Robotics. The research was supported by funding from the Engineering and Physical Sciences Research Council (EPSRC).
Why are you making commenting on The Herald only available to subscribers?
It should have been a safe space for informed debate, somewhere for readers to discuss issues around the biggest stories of the day, but all too often the below the line comments on most websites have become bogged down by off-topic discussions and abuse.
heraldscotland.com is tackling this problem by allowing only subscribers to comment.
We are doing this to improve the experience for our loyal readers and we believe it will reduce the ability of trolls and troublemakers, who occasionally find their way onto our site, to abuse our journalists and readers. We also hope it will help the comments section fulfil its promise as a part of Scotland's conversation with itself.
We are lucky at The Herald. We are read by an informed, educated readership who can add their knowledge and insights to our stories.
That is invaluable.
We are making the subscriber-only change to support our valued readers, who tell us they don't want the site cluttered up with irrelevant comments, untruths and abuse.
In the past, the journalist’s job was to collect and distribute information to the audience. Technology means that readers can shape a discussion. We look forward to hearing from you on heraldscotland.com
Comments & Moderation
Readers’ comments: You are personally liable for the content of any comments you upload to this website, so please act responsibly. We do not pre-moderate or monitor readers’ comments appearing on our websites, but we do post-moderate in response to complaints we receive or otherwise when a potential problem comes to our attention. You can make a complaint by using the ‘report this post’ link . We may then apply our discretion under the user terms to amend or delete comments.
Post moderation is undertaken full-time 9am-6pm on weekdays, and on a part-time basis outwith those hours.
Read the rules here