Queensferry Crossing to close for testing of automated barriers

The bridge will close for a period on Sunday morning. <i>(Image: Supplied)</i>
The bridge will close for a period on Sunday morning. (Image: Supplied)
This article is brought to you by our exclusive subscriber partnership with our sister title USA Today, and has been written by our American colleagues. It does not necessarily reflect the view of The Herald.

The Queensferry Crossing will close for a period as automated diversion barriers are tested out following maintenance.

Traffic will be redirected to the Forth Road Bridge between midnight and 4am on Sunday.

It will follow a series of closures in the area that began on Wednesday.

BEAR Scotland’s Southeast Unit Bridges Manager, David Bishop said: “The automated barrier system on the M90 significantly reduces the time it takes to open a diversion via the Forth Road Bridge, should the Queensferry Crossing need to close for any reason.

“These overnight closures will allow us to test the system and identify and address any issues so that it is ready to be used if required this winter.

“It is important that road users comply with red X signs above the carriageway when these appear, as the diversion route cannot be opened until traffic on the motorway has stopped.

“If there are red X signs above all lanes, you must come to a stop.”

On the nights of Wednesday, November 5 and Thursday, November 6

Between 10pm and 5am, the northbound carriageway of the M90 will be closed next to Junction 1B Ferrytoll, to allow the system on the north side to be serviced.

Northbound traffic will be diverted down the Ferrytoll off-slip and immediately back onto the M90 via the Ferrytoll on-slip.

On the night of Friday, November 7

The A90/M90 will be closed in both directions between the Scotstoun and Queensferry junctions, from 10pm until 5am.

Southbound traffic will be diverted from Junction 1A Queensferry via the A904 to Echline Junction, then via the southbound Forth Road Bridge onto the A90 into Edinburgh, Maybury Road and Glasgow Road to M9 Junction one Newbridge.

Vehicles joining the M90 northbound from the A90 will be moved up the northbound carriageway of the Forth Road Bridge and then onto the B800 towards Echline Junction, the A904 and Queensferry Junction.

Those wishing to join the M90 northbound from the M9 eastbound will be shifted off at M9 Junction two, onto the B8046 and then the A904 to M90 Junction 1A Queensferry.

Meanwhile, drivers wanting to join the M90 northbound from the M9 westbound will be diverted on to M9 Junction three, and then back eastbound to exit at M9 Junction two, onto the B8046 and then the A904 to M90 Junction 1A Queensferry.

The M9 Junction 1B Winchburgh eastbound on-slip will be closed, with traffic diverted from M9 Junction three.

Those using the Queensferry Crossing or Forth Road Bridge during these works are encouraged to plan ahead by checking the Traffic Scotland website www.traffic.gov.scot for up-to-date travel information and allowing extra time for their journey.

Get involved
with the news

Send your news & photos