Distillery project pioneers method of making whisky in green way

Annandale Distillery <i>(Image: Annandale Distillery)</i>
Annandale Distillery (Image: Annandale Distillery)
This article is brought to you by our exclusive subscriber partnership with our sister title USA Today, and has been written by our American colleagues. It does not necessarily reflect the view of The Herald.

A Scottish distillery says it has pioneered an environmentally friendly means of generating the heat needed to make whisky.

In what they say marks a global first, Annandale Distillery in Dumfries and Galloway and clean heat technology company Exergy3 have launched a decarbonised heat project.

The project uses a modular, thermal energy storage system sourced through wind power, converting renewable electricity into thermal energy – storing it at ultra-high temperatures.

Hot air can then be discharged at temperatures of up to 1,200C, with the air at Annandale Distillery set at 530C, which is converted into eco-friendly steam by a boiler which is used in the distilling process.

The technology forms part of the distillery’s 12-step decarbonisation plan, which also includes bottling and maturing whisky on site to reduce road miles, switching to electric vehicles where possible, and exploring alternative waste-reuse options for spent grain and carbon dioxide.


READ MORE:

Historic Scottish golf club faces major change under new plans

Scotch whisky giants open talks over blockbuster merger

Scotland's smallest distillery to release first single malt made in 171 years


Prof. David Thomson, cofounder of Annandale Distillery, said: “This is a first – not just for the whisky industry or Scotland, but globally. Heat-intensive industries like ours are under increasing pressure to decarbonise, and solutions that can deliver high-temperature heat without fossil fuels have been hard to find. The fact that it does so economically, while also helping tackle the rising costs of balancing the electricity system, makes it incredibly powerful.” 

Exergy3’s modular thermal energy storage system converts renewable electricity into thermal energy and stores it at ultra-high temperatures. The system then discharges hot air at temperatures between 50°C and 1,200°C, depending on industrial requirements. This makes it widely applicable across industries including food, drink, chemicals, pharmaceuticals, fertiliser, and cement. At Annandale Distillery, the system delivers hot air of up to 530°C, which is turned into green steam by a Cochran boiler and used in the distilling process.

Eric Daglish from industrial boiler manufacturer Cochran Ltd, which was chosen to supply the boiler, said: “Across industry, we see growing interest in alternatives to fossil fuels as companies work towards their carbon reduction goals. One of the biggest challenges has been finding solutions that are both practical and economically feasible, but this technology shows that it’s possible. We are proud to be part of a project that marks such a significant milestone for the wider decarbonisation of industry.”

Annandale Distillery was revived in 2014 (Image: Annandale Distillery)

Markus Rondé, CEO of Exergy3, said: “We are delighted to have partnered with Annandale Distillery to decarbonise one of Scotland’s most important exports and look forward to raising a toast with the very first low-carbon whisky of its kind. Beyond whisky, our solution could halve global industrial CO₂ emissions, while being cheaper than gas and reducing rapidly rising curtailment costs that are paid for by the consumer.”

Annandale Distillery produces both peated and unpeated whisky: Man O’Words is Annandale’s unpeated range, while Man O’Sword is its peated counterpart.

The distillery was revived in 2014 by Professor David Thomson and Teresa Church. It's 4,000 litre copper stills were the brainchild of the late Dr Jim Swan, who had a 40-year career as a research scientist and trusted adviser to whisky distilleries around the world prior to his death in 2017.

Get involved
with the news

Send your news & photos